Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter ceiling fan Remote control replacement.
[ 22 Answers ]
This is driving me nuts. OK I know where the b and w wires go from the fan to the receiver also the " one " that says light out " which is red. What I have left on the receiver is Fan out and Common out. From the fan there is a brown wire by its self and a bundle with red, yel, gray,...
Hunter ceiling fan remote control replacement
[ 5 Answers ]
I was given a replacement remote/reciever at Lowe's. Some kid told me it would work. I ohmed out the motor which has two windings (pink to yellow and red to grey). I paralelled the two windings with the new receiver output and neutral. The fan doesn't run as fast as it did before. The winding ohmed...
Hunter Stafford fan, Hunter remote 27157 and two wall switches
[ 3 Answers ]
From the ceiling is a tan, a red, a black and a ground that go to two switches on the wall. The fan has a black, a black with white, a ground and a white. The remote has a black, a red, two whites and a black with white stripe. Which do you connect to which? Thanks.
Hunter Fan replacement remote control module
[ 3 Answers ]
I have a Hunter Fan (Palermo: model#21618), and have a defective receiver. I have purchased the Hunter replacement All-Fan Remote Fan and Light Control (model#27185). The problem is this: Fan has seven wires (white, black/wht, green, red, pink, grey, yellow) The new reciver has five... View more questions Search
|