 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I want to lubricate a 10 - 12 yr. old Delta tub/shower faucet; it's a two part handle with the temp control on top and volume underneath; but can't see how to dismantle it; there are no set screws, just a chrome tip to the plastic handle but I can't get the tip to come off and don't want to pry too...
My home was built in 02 with sink in place. I have a single handle Moen kitchen faucet that I am trying to replace with another unit.Under the bottom of the sink thare is a U shaped plate around the h/c water lines come out. Do I start from the top taking apart the faucet to remove it from the...
Hi, I'm trying to fix a leak in my bathtub faucets and was expecting to unscrew the stem "holder" (sorry, I don't know the name of the part that the stem and the packing felt sits in) to replace the seat and washer. However, what I discovered was that there is no stem "holder" and that the stem...
I need to replace the cartridge in my bathroom faucet, but I can't get the 1 1/2" nut off under neath the sink. The basin wrench that I bought only goes to 1" and a 12" wrench is too big for the space under the sink. I called a tool rental place and they also did not have a basin wrench large...
I am demoing my small bathroom. But I have been unable to get the little buttons over the screws holding the handles on, off. What can I do to pop these buttons off?? Bathroom is about 20 years old and I don't think these handles have ever been removed. Please help?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
