 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Payne Furnace
I have a payne furnace that when the thermistat kicks on the furnace fires up the first stage and glows orange. After a minute you hear a click and sometimes it goes into the next stage with the blue flame and some times after a couple of clicks it just turns off. Then I have to drop the temp and run it back up again to repeat the process in order to get it to finally ignite the second stage and hold.Any suggestions would be helpful.
|
||||
Check out some similar questions!
What is the cost of a Payne furnace? Model PG8JAA
I had a new Payne furnace model PG8MAA042090 installed a couple of weeks ago. It has not worked consistently since it was installed... keeps shutting off. Incidentally, we replaced the thermostat at the same time with a Honeywell programmable model. One company came out and replaced the limit...
Received a quote on installing a new furnace. Want to know if he price is OK. Payne PG9M installed $2800
Gas furnace is to draw combustion air from outside. Installation allows compution air to be feed into the furnace from the left or the right and provides a plug for the unused side. With the plug installed furnace tries to run but the pilot light gets blown out. Leaving the plug out the furnace...
I have a Payne Gas Furnace that works great until it is time for the blower to click on instead of coming on it clicks on and off once and a while it starts but only goes for a minute or two then goes back to clicking on and off can someone give me an idea of what this could be? Could my board be...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
