Payne furnace cost

cat52169 Posts: 1, Reputation: 1

New Member

Mar 26, 2009, 09:58 AM

Payne furnace cost

What is the cost of a Payne furnace? Model PG8JAA

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Mar 26, 2009, 05:59 PM

You will need to call local for a price. The price changes in different areas of the country.

Add your answer here.

Check out some similar questions!

New Payne furnace overheating [ 2 Answers ]

I had a new Payne furnace model PG8MAA042090 installed a couple of weeks ago. It has not worked consistently since it was installed... keeps shutting off. Incidentally, we replaced the thermostat at the same time with a Honeywell programmable model. One company came out and replaced the limit...

Payne furnace fan does not turn off [ 1 Answers ]

The fan in the furnace keeps running. The heater and the ac works OK but the fan does not Turn off until I unplug the unit. I plug the unit and the fan starts running again. I unplugged The TOTALINE thermostat and it still runs. I disconnected the green wire at the control board And still...

What is the price of a Payne PG9M furnace [ 1 Answers ]

Received a quote on installing a new furnace. Want to know if he price is OK. Payne PG9M installed $2800

Payne gas furnace not getting enough [ 3 Answers ]

Gas furnace is to draw combustion air from outside. Installation allows compution air to be feed into the furnace from the left or the right and provides a plug for the unused side. With the plug installed furnace tries to run but the pilot light gets blown out. Leaving the plug out the furnace...

Payne Gas Furnace [ 1 Answers ]

I have a Payne Gas Furnace that works great until it is time for the blower to click on instead of coming on it clicks on and off once and a while it starts but only goes for a minute or two then goes back to clicking on and off can someone give me an idea of what this could be? Could my board be...