 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wo wires only
How do I wire a new honeywell thermostat old system had two wires hooked up with a jumper but they came off before I could see where they were attatched. I hooked one to R and one to W but the fan does not come on with the heat switched wires (both are black) and still no fan does something have to be piggybacked
|
||||
Check out some similar questions!
My question is to match the right color wires to operate ceiling fan and light fixture. The wires came loose before I could match them. The swith has three colors black, red and blue. The colors that are to be matched with are green, red and orange. How do I match these. Additionally it has a...
The 3-way speed switch on my ceiling fan broke. I bought a new switch from Home Depot. The original switch has 4 wires, pink, yellow, grey and black. They are labeled black-L, yellow-1, pink-2, grey-3(strip). New switch has 3 wires, red, blue and black. Labeled, black-L, red-1, blue-2. How I...
Old thermostat is Honeywell. 2 wires are coming out of wall. 2 white and 3 black. 2 black are connected to Rc, one white connected to W and one white to Y. 2 other slots marked as G and R were directly connected to each other. I purchased NOMA thermostat. It has 4 slots G R Y and W. How to connect...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
