Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Uneven adjoining concrete
[ 3 Answers ]
I want to extend the tile from a addition into a existing dining room to make it all match. The new room is already tiled and is 1/2 inch lower than the room we plan to tile to match. Both rooms are concrete slabs. What's the best way to connect these two floors with the least noticabiltiy? ...
Electrical sub panel in an adjoining room
[ 10 Answers ]
I am planning on installing a sub panel in an adjoining room for a wood shop. I am planning on feeding the sub panel with a 100A breaker from my main panel. A friend told me that because the sub panel is in another room "out of sight" of the main panel it is required that another 100A "main"breaker...
Upstairs/Downstairs bathrooms leaking
[ 4 Answers ]
Wondering if I have a main line problem. The upstairs and downstairs bathrooms are both leaking from the dining room and garage ceilings. I rent and the owner keeps sending plumbers to caulk the problem and it only holds for a few weeks or month. There is no leaking on the floors or walls of either...
Attaching Wood spacers to adjoining new cabinets
[ 1 Answers ]
What is the bes way to attach the spacers to the new cabinets I have purchased ? Should I glue them to the cabinets or should I just put two screws at the top and two screws at the botton of each spacer --- two on each side naturally --- ? Thanks Golfer 156:)
Proper grounding for 400A service and adjoining panel
[ 1 Answers ]
I am installing a 400A service panel on the outside wall of a garage. For the time being it will only be supplying power to a 125A panel located on the inside wall of that garage. The 125A panel will be mounted inside the wall directly behind the 400A service, and the two will be connected by... View more questions Search
|