 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace not turning on.
I just lit my pilot light and is running fine, but furnace won't kick on when thermostat is engaged. I just installed a new fan limit switch(Honeywell) and the blower works fine. Furnace is a GE model no. 21LU100A2A and thermostat is model 3AHT10B1A2, 30 volts AC, 2.0 amp.
|
||||
Check out some similar questions!
My heater furnace is not turning on. The fan turns on and the outside compressor is on, but it only blows cold air.
Problem started last night. Before bed I went to turn the temp down on the thermostat. I got the clicking sound from the thermostat indicating that it was sending a connection to the fan. No fan turned on. I went above the desired temp and it clicked again. Back down below and again another click....
Hi there. New to this but here goes. I have a Rheem RGMC-125A propane furnace that is 24 years old. Never any problems till this winter. Is has a constant pilot flame. We lit the pilot and it works properly. When we turn on the thermostat, it clicks but nothing turns on. The burners do not...
The blower on the furnace (HEIL SP 80) keeps shutting off and on during the cycle it would be blowing. The normal cycle appears to be working but when the blower turns on it keeps shutting off and on. Does that make sense how I asked the question?
I've replaced the thermostat but my old one was so dated I couldn't see any significant number settings e.g. anticipator setting. What's that?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
