 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane xe80 fan squeking?
I have replaced the blower motor on my XE80 believing that the noise that was coming from it was due to failed bearings. I installed the new motor and the noise is less but still there. Is it possible that the fan itself is unbalanced or faulty in some way as to cause this noise? There are no obstructions, no rub points and it is not a noise being produced by vibrations - it is making the noise sitting on the ground outside the furnace before installing back in the chamber.
Thoughts? |
||||
Check out some similar questions!
My xe80 will not start, nothing. The code from the control unit blinks 3 times and the legend tells me there is a "Pressure Switch Problem." What can I do to repair it? Marvin [email protected]
My 10 year old Trane XE80 in my woodworking shop lately cannot put out enough heat to satisfy the thermostat, which yesterday was set at 72 degrees on a 37 degree day. The steel building is completely insulated, and this has never happened before at this outside temperature. The furnace seems to...
My thermostat calls for heat, but the blower just comes on and blows air. No heat until I go down and manually restart the furnace. Any suggestions?
My thermostat calls for heat, but the blower just comes on and blows air. No heat until I go down and manually restart the furnace. Any suggestions?
The blower on my parents Trane XE80 gas furnace stopped working this weekend and a local HVAC company diagnosed the problem as a bad control board. The technician didn't have a board on his truck so he temporarily bypassed the control board and wired the fan to stay on 100% of the time until he...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
