 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have an old Robert Shaw thermostat how do I bypass it to turn on the heater/
I live in an old house that has a old floor heater, the thermostat will not turn the heat on. How can I bypass the thermostat and turn on the heater? The yellow wires are connected to the Mercury and the black ones are connected to screws.
|
||||
Check out some similar questions!
We recently bought a home with a robert shaw 303 thermostat controlling our heat pump and air handler. We had a number of trades in doing some renos and I think they have adjusted the heat. I was leaving set as it was by the previous owner. My concern is that when I look at the display, I don't...
There are two temperatures being shown on the display screen of a Robertshaw 9620 thermostat. I know one of them is the room temperature (larger of the two) but what is the other temperature that is being shown?
How do I wire up this new Robertshaw 3210 Thermostat? I have a gas, forced-air furnace. The wires coming out of my wall are labeled: RC, Y, W, G. The new Robertshaw 3210 thermostat has these connectors: R, C, L, O, B, W2, E/W1, Y1, G Which wires go to which connectors? Do I need to add some...
I currently have a General Controls T-90 thermostat and I want to switch that with a RobertShaw RS5110. My current Thermo is wired with a Green wire going to F a Black wirre going to C a White wire going to H and a Red wire going to M. There is no diagram for this configuation. Does anyone have...
I have a Robert Shaw 9620 7 day Programmable digital thermostat 2 heat/2 cool . We have a Goodman heat pump I want to know how to hook up this thermostat to my 7wires coming in, the 7 wires are as follows yellow blue red green white brown orange. I need to know where all these wires go to in the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
