 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Installing a q106(w/r24a34-6) into carrier 40f unit with (w/r24a55-124)
Hi, i am trying to install a beacon q106 (replaces w/r 24a34-6) fan/heat sequencer in my carrier 40fs160300 unit. The problem i am having is that i have no diagram on how to install this newer style sequencer were the old w/r 24a55-124 is located. If anyone can please help me i would be very grateful, i cannot afford a repairman because i am on s.s.disability. Thanks for your help and happy holiday! m.m.
|
||||
Check out some similar questions!
Hi hope you can help. We have a carrier unit that is approx 6 years old. The thermostat has no reading (also a carrier). Checked fuses on unit itself they are not blown. Flipped circuit breaker - still nothing. Took working thermostat from dowstairs up and still no reading/action of any sort. Any...
Is installing a 410freon unit the same as installing a 22 freon unit or is it difrent
Hi Everyone! My husband and I are trying to install a replacement shower unit that fits in the space that our one unit tub was... The old one unit bath tub had walls that went up on all sides and had to be cut up in order to remove the unit from the house. The old tub unit was installed when we...
Hi; We have an 18 year old fridge. It is cooling down only to 40F when on the highest setting. The freezer is fine. We have cleaned the condenser coils, but it didn't fix the problem. Power is OK. I think it's time to buy a new fridge, but I wanted to get some opinion first. FW
could anyone tell me why I my blower fan on my carrier (model#485x-036100331) will not run. It seems that every thing else works fine because the compressor & condenser runs and the coil will frost up. The only thing I found to check was a 5amp fuse. Any suggestions would be greatly...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
