 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Dryer runs fine but no heat. Model Number 110.66662501
The dryer runs, but does not heat up. It also never shuts off on timed drying. I found what looks like a burned out resistor, a ceramic bar covered in hard plastic, spliced in the orange wire between the timer and the heater, per schematic. The plastic cover is split open and looks melted. Would...
Our dryer runs but won't heat. Also, the inside bulb does not turn on when the front door is opened. I believe the two problems appeared simultaneously. Kenmore Model #: 110.76902690 Equipped for natural gas. The instruction on the dryer says "240 Volt dryer operates on two fuses in the...
Dryer won't heat and I have continuity on all the reachable parts. Not getting juice to the coil during operation. I should have 0.00 OHMS for normal operation, tested when cool on all the parts, right? Thanks for your help.:eek:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
