 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
We just bought a used dryer from a friend. She had the heating element replaced and says it works fine. We are running our first load and it keeps kicking off (on Low Heat). We placed a fan by it to see if it was overheating, with the same results. Also turned to No Heat setting and also got...
The dryer is 20 yrs old, still runs but will not heat. Tested electric connections to heating element. When dryer off, one side is charged. When dryer is on, both sides are charged or "hot", but dryer is not heating. Not sure how to get to the fuses in the dryer, but have checked the electric...
This is my first dryer and soon as 3 year warranty goes out it start to act up. I did cut off/on both the breakers to see if it help, but apparently not other than that everything works. I never look inside the dryer before so I have no idea what the thermostat nor a fuse look like and where...
I have a Kenmore Elite electric dryer . Model 110.62994101 the will not stay running after the start button is released. I am suspecting that a relay on a main board is bad. Or could there be a less expensive repair solution.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
