Ask Experts Questions for FREE Help !
Ask
    akrh125's Avatar
    akrh125 Posts: 9, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2010, 11:15 AM
    Hi, I need help making a connection. Thanks!
    Hi, I have purchased an IR Illuminator to go along with my CCTV cameras and I don't know how to make the connection to the power supply. There are six wires, red (12V DC), orange (GND), black (EXT IN (GND)), yellow, green and brown (EXT IN (HIGH, 5V-9V)). Here is the link to the manufacturer's website: http://www.cnbusa.com/en/html/produc...seqx_prod=1060

    You can check out the "manual" there. I couldn't make anything of it. Thanks for your help!
    akrh125's Avatar
    akrh125 Posts: 9, Reputation: 1
    New Member
    		  
    #2

    Nov 21, 2010, 09:13 AM
    Photos of the end of the cable of the IR Illuminator, connector and adaptor:

    http://i934.photobucket.com/albums/a...8/IMG_0174.jpg

    http://i934.photobucket.com/albums/a...8/IMG_0173.jpg

    http://i934.photobucket.com/albums/a...8/IMG_0172.jpg
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #3

    Nov 22, 2010, 08:12 AM

    Your link to photos isn't working...

    As to the other question... the EXT is used when you want them to come on with your camera..

    but that isn't used in auto mode when it basically works dusk to dawn.

    In a Security system its essentially on during the dark hours as the camera runs 24X7.

    in which case pin #6 takes a positive DC power in the 5-9 volt range. Pin #3 is the ground for THAT power, the +12 volt is self explanatory, Positive to pin #1, and ground to pin #2.
    akrh125's Avatar
    akrh125 Posts: 9, Reputation: 1
    New Member
    		  
    #4

    Nov 22, 2010, 08:24 AM
    These links should work:
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Making the right connection with Dish NTWk HD box, Panasonic DVD/VCR recorder and LG [ 2 Answers ]

I got a response from and earlier question yesterday, thanks. Now my question is some what related, but a little more in detail. What is the best way (procedure) of connecting an HD Dish Satellite box, Panasonic DVD/VCR recorder (with built in tuner), and LG HDTV. The Satellite box has...

What is the difference between pipe glued connection and solvent welded connection [ 2 Answers ]

Like the title. I wondering what's the difference between glued connection and solvent welded connection. If anyone knows, please give a detailed description, and how about hub and socket connections with the above two connections?

98 accord making clunking noise when making hard left turn [ 3 Answers ]

My 98 accord ia making a clunk, clunk, clunk sound when making hard left turns. It only does this with left turns a slow speed like making a u-turn. It actually seems to make the car bounce a little with each clunk. It is definitely not a clicking noise. I have just put a prelude h22 engine with...

Making a new connection for ceiling light [ 1 Answers ]

Hi , I just moved into a new house. I am trying to put a light on the ceiling of my basement closet. There is a light bulb 3 feet away from the room. I guess my question is can I or how should I put a new plate in the closet using the light fixture outside? Thanks.

View more questions Search