 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have Janitrol HPT18-60 and replacing with RTH3100C but furnace is not kicking?
HPT18-60 wire connections are:
Y --> Yellow G --> Green R --> Red O --> Orange W2 --> White E --> black C --> blue Connecting on RTH3100C: E --> black Aux --> White Y --> Yello G --> Green O --> Orange L --> R --> Red B --> Black C --> Blue Change setup to 9 for electric Furnace but furnace is not kickiing. Any idea? |
||||
Check out some similar questions!
I have a white wire going to W2 and E both and a blue wire going to C. Where will these go on the new Honeywell thermostat?
I have a white wire going to W2 and E both and a blue wire going to C. Where will these go on the new Honeywell thermostat? Everything else matches up.
Replacing Janitrol thermostat with LUX programmable Tstat, all wires lined up Y, G, R, O, C except W2 and E when switching from a Janitrol HPT18-60 to a LUX TX9100E. The Janitrol had a W2 white wire and E brown wire, and the new only has W1 and W2. Should the old W2 white actually go to W1 (I...
I am replacing mine with a hunter 44860 progammable thermostat. My wire colors are Yellow,Green,Red,White,Blue, and Pink(appears to be just a lighter shade of red?) Turned unit on but no power or fan. A little confused because of wire color.
My existing thermostat is a Janitrol HPT18-60. Wich has 7 connections, and 6 wires... Y-yellow, G-green, R-tan, O-brown, C-blue, and a red wire connecting an E and W2. I'd like to replace it w/ a Honeywell RTH230B. Wich has... Rh, Rc, W, Y, and G. However, I cannot find a wiring schematic,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
