 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
It will work fine for even up to an hour... then it will stop igniting and blow cold air. I have to manually reset it at the thermostat or it will continually blow. I have cleaned the ingnitor scensor and that doesn't work. It works fine in warmer weather, but as it gets colder the symptoms come...
I have an Trane XR80, it is blowing cold air, and it looks like it is trying to ignite but it does not.
From my earlier post ignite for a few seconds the stops, now, heat commanded, blower motor runs, no ignition, and flashes code 22 Help!
This morning I woke up to a cold house, the furnace was blowing away and only blowing cold air. I checked the thermostat and the heat was set at 72 but the house was still at 66 degrees. I cycled the furnace on and off but still there was only cold air blowing from it. When I last checked before...
My daughter recently rented a house. The heat in the house blows cold air in two of the bedrooms and one vent in the dining room. The landlord is telling her these are return air ducts. If this is the case half of her house has no heat. Is this possible, there are what appear to be two return air...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
