Ask Experts Questions for FREE Help !
Ask
    dcart74's Avatar
    dcart74 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 13, 2010, 02:32 PM
    Honeywell RTH2300B not working
    I have a Honeywell RTH2300B Thermostat that I just installed. My heating system is a boiler with baseboard heat. I have three floors in my house and I have a thermostat on each floor. I only have three wires for each thermostat, a R, G, and W. When I hooked up the new thermostats the heat turned on but will not shut down. I have tried overriding it with the hold button but nothing works to shut off the heat. I have put back my old mercury thermostats until I can figure this out. Should there maybe be a jumper in there or something else? An ideas?

Check out some similar questions!

Honeywell system A/C not working? [ 7 Answers ]

Holy Crap it is 82 degrees in the house. I have tried many different settings, read the dang manual can't find out how to get the a/c to come on. Should it be on Auto or should I have it on fan? What temp to set it to? I just tried to look through the frequently asked questions but it didn't...

Honeywell RTH230B a/c is not working right [ 1 Answers ]

We purchased a Honeywell RTH230B thermostat last winter and up until the past week, it has working fine but now the a/c comes on, feels cool but won't get the house to the right temp. On the thermostat itself it shows 72-73 regardless what you put it on manually or the auto temp thing. We like it...

Honeywell thermostat RTH230b not working [ 2 Answers ]

I installed the RTH230B (Honeywell) over a year ago. It has been working fine until just lately when I noticed the battery display was blinking indicating that I need to change the batteries. I removed the cover and replace the AA batteries with freshly charged, rechargeable batteries. The front...

Honeywell HE360 Humidifier Is Not Working [ 3 Answers ]

I recently installed two Honeywell HE360 humidifiers. One above each furnace in a dual zone system. Everything seems to be working like it should, but the humidity in the house isn't going up. The units are installed on the discharge of each furnace, and are piped to cold water. The water...

Honeywell RTH230B A/C Fan Not Working [ 3 Answers ]

I've read numerous threads on this model but could not find a solution. I just replaced my old thermostat with this model. The wiring on the old thermostat went as follows: Red - Rc jumped to Rh White - W Green - G Yellow - Y When I removed the old thermostat I noticed there was a blue...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.