Ask Experts Questions for FREE Help !
Ask
    baseballfan33's Avatar
    baseballfan33 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 13, 2010, 01:18 PM
    My chevy truck cranks but won't start?
    I have a 1998 Chevy Silverado with a 5.7 liter engine, that will crank and hit for a split second than die. I have changed the ignition module, the cam shaft sensor and bumped it against a log to reset the security system. Do you have any ideas what else it might be, the fuel pump alson runs fine when u turn the ignition on, Please help!
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Sep 13, 2010, 01:21 PM

    This link may help:

    https://www.askmehelpdesk.com/cars-t...ml#post2123675

    If the problem persists, replace the coil packs. What does bumping the security system against a log mean?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #3

    Sep 14, 2010, 01:11 PM

    I did and it must have gone over your head. How could you have missed it? What do you call checking all under hood and under dash fuses with a test light or multimeter? What do you call checking for spark? What do you call checking for DTCs? What do you call replacing the coil packs? I laid out a complete series of tests for you to follow and you say I did not answer your question and provide you with additional ideas of what else it might be. None of these items did you say you had previously performed.
    teal99's Avatar
    teal99 Posts: 1, Reputation: 1
    New Member
     
    #4

    Nov 12, 2010, 01:27 PM
    My chevy blazer won't start it gets gas and spark and it just died on my way home.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #5

    Nov 12, 2010, 01:43 PM

    Teal 99, I'd focus on the Ignition Control Module. You may have spark but it may not be at the right time.
    crieg's Avatar
    crieg Posts: 2, Reputation: 1
    New Member
     
    #6

    Jan 12, 2012, 03:23 PM
    My 02 chevy truck has spark and gas and won't start.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1988 chevy truck won't start and has no spark or feul [ 1 Answers ]

I was driving my 1988 chevy silverado truck home from work and it died going down the road and won't start and it like there's no spark what should I try

1990 chevy truck cranks but no start [ 2 Answers ]

Just finished cleaning the idle mixture, started right up drove better than it ever has then few miles down the road the check engine light comes on, I pull over shut off the engine then after finding nothing visible try to start the motor but won't start.

Truck cranks but won't start [ 1 Answers ]

I have a 2003 GMC sonoma 2 wheel drive 4.3 v6. I just got a fuel pressure gauge and when I turn the ignition on the gauge reads 60 psi so I think my fuel pump is good. Now I am trying to figure out if it's a crank or camshaft sensor or the fuel pressure regulator but I don't know where they are...

1989 chevy truck spark&gas won't start [ 1 Answers ]

HI. ALL.I have a 1989 chevy cheynne truck.new wires ,spark plug's,this cap.WORKED Like a timex 1 day,next day won't start.has spark,poured gas in carb.WONT OFFER OR GO PUT ON NEW COIL New ing modgle.wont go.when you turn key,dash has seat belt,and battery,in red that is all.can you advice.thanks.

1989 chevy truck spark&gas won't start [ 2 Answers ]

HI. ALL.I have a 1989 chevy cheynne truck.new wires ,spark plug's,this cap.WORKED Like a timex 1 day,next day won't start.has spark,poured gas in carb.WONT OFFER OR GO PUT ON NEW COIL New ing modgle.wont go.when you turn key,dash has seat belt,and battery,in red that is all.can you advice.thanks.


View more questions Search