 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What wires go where on a manual heat and cool lennox thermostat
I disconected a manual lennox thermostat it had two switches one was cool,off,heat,emergency heat and the second was fan on or auto I didn't label my wires I have central air electric the wires coming out of the wall are black blue orange white green yellow and brown what wires went where on the lennox so I know what wires go where on my new thermostat which is a ritetemp?
|
||||
Check out some similar questions!
The unit is a 1988 or 89 lennox g12 conservator unit and its wired incorectly I need to know how to wire from the tsat to the transformer. Also I don't see a circuit board.
The system started to chirp during the night and will not stop. Any ideas on what is causing it? And how to stop it?
I have radient heating and a central air system. I currently have my heat set at 68 degrees and just this week the central a/c is blowing air off and on. The compressor is not running so what is going on? Any ideas? :confused:
Hi, I'm replacing my thermostat for my gas furnace. The old thermostat had Red, White, and Green wires. The old thermostat had a Cool-Off-Heat switch as well as a fan On-Auto switch. My new thermostat has no such controls, it is just a no-thrills heater thermostat. My new thermostat doesn't...
I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
