 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Skymark/Skypak furnace
My Skypak furnace does not work. It works in A/C mode, but does not work in heat. Pilot cannot ignite. When I turned of HEAT on thermostat and fired pilot manually it stay on, but when I switched HEAT ON on thermostat than pilot OFF. Fan does not blow any air. Same problem I had 4 month ago. Plumber replaced gas valve and it start working, but I do not think this was a problem.
Can anyone help me, please. Thanks Y. |
||||
Check out some similar questions!
How much should it cost to replace a natural gas furnace
My furnace won't come on when I turn on the thermostat
My furnace will kick on for a few seconds and then kick right back off. 3 or 4 seconds later it will kick back on and run until it reaches the correct temp. I tried to turn it down to 60, but it seems as though that made it worse so I turned it back up to 70. My questions is will this be OK for a...
We have central AC/Heating with separate Bryant heating and AC units that are controlled from the same thermostat in the house. When I turn the Heat ON and set Temp to way higher than current Temp, the light on the thermostat comes on but the heating unit does not go on... no sound of burners...
I had a friend come out and look at my furnace because I was having some a/c issues and prior to it getting hot I was having some heating issues. Well the result is that my motor went. The furnace is/was about 25+ years old. I now have to purchase a new furnace. Where do I start?And does this...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
