 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a single lever (actually a rotating knob) American Standard valve. It's stuck so that it doesn't allow any hot water (cold is fine) to pass. Last time this happened (that was about a year ago -- this particlar shower doesn't get used much), the plumber removed the face plate, took out a...
Can the old Mexican version Incesa Standard wall mounted toilet be replaced with the new elongated version of the wall mounted American Standard toilet? Making sure both fits are standard connections... sizes, etc. I've heard 4" center and 4 1/2" center from floor. What do I need to be aware of...
Replaced Amer Std "ultramix+ bath and shower cartridge" (051337-0070A.) Had lubed washers, reassembled with care & still leaking about 5-6 gallon per day, same as before, more drips when water is turned on and off in same plumbing run. THANKS!
Hi, I installed a american standard shower valve in my shower and I hooked up the hot and cold supply lines backwards. Is there and easy fix to this I really don't want to cut a hole in the back of my wall to fix this. Thanks Stancy
I Have an old American Standard one handle shower only valve (approx 40 yrs old). I bought a repair kit from a plumbing parts store consisting of valve seats, o-rings compresto install the repair kit?sion springs, etc. Can I gain access to the valve from the shower, or do I have to cut a hole in...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
