Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Back to back meter base and breaker panel
[ 9 Answers ]
Hi, I want to mount meter base and breaker panel back to back, running the cable through the back of the meter into the back of the breaker panel. Breaker box will mount on a 2X4 exterior wall, and I would connect the two boxes with 1 1/2 nipple. Is there a problem with this idea? I'll be talking...
Relocate service panel
[ 1 Answers ]
Existing knife shut-off and meter are on pole 20 feet away and has been double tapped to service 2 different panels inside. I need to hang a new 200A panel on outside and tie the furthest panel in as a sub panel. What size wire, what type of wire and what conduit will work? For instance, can I use...
Relocate main or add sub panel
[ 0 Answers ]
We have an old cottage; raised 4' above ground, exposed to the elements, in Ontario, Canada and we would like to relocate the main 100A panel about 25 feet over to new kitchen location OR install a sub panel there instead to serve us better. What wires should we use to reloacte the main panels...
Relocate Electrical Meter
[ 1 Answers ]
I am planning to add an addition to my house the problem is the wall I'd like to demo for the additon is where my Electrical service is. Bare in mind I have not talked to the town inspector yet and I'm trying to finalize my plans to get my permits. Just trying to make sure I'm covering every...
How do I relocate a main service panel?
[ 4 Answers ]
I need to move my main service panel about 20 feet. All of the branch feeder wires need to be longer to reach the new box. How do I extend them? View more questions Search
|