Check out some similar questions!
Heat pump won't stop running once desired temp reached
[ 4 Answers ]
We have a Lennox heat pump with a standard (non-programmable) Honeywell thermostat. Last weekend we didn't have any heat, no fan, nothing. My cousin who does commercial heating/air conditioning install & repair replaced the old programmable thermostat with the a new, standard Honeywell...
Funace won't reach desired temp. Then won't restart
[ 0 Answers ]
I have a Bryant plus 90 furnace. Approx 8 years old. It will run for about 5 minutes then stop before reaching desired temp. Then it will try to start up again but shut down before ignition. Flipping power on and off will make it work again. I cleaned the flame sensor with no change. It appeard to...
Goodman heat pump does not click off when thermostat reaches desired temp
[ 1 Answers ]
I have a goodman heat pump model #a32-10 controlled by a Honeywell Thermostat model #RTH3100C-installed last winter. Temperature in South Carolina this week has been ranging in the day in the lower to mid-40's and at night ranging in 20's or teens. I usually keep thermostat set between 66-68. The...
My beckett furnace runs,but won't stay on long enough to reach desired temp
[ 0 Answers ]
My beckett 55,000 btuh model afg runs but shuts down before desired heated temp.the computer panel was changed for 160.00.that did not fix the problem.it struggles to get warm in house
Thermostat does not stop on set temp.
[ 5 Answers ]
Hello, I Was Wondering If Anyone Can Help Me With This: I Changed The Location Of The Thermostat From One Side Of The Closet To The Other. I Did Not Moved The Cables As They Were Still In Range. I Also Made Sure To Keep The Same Color Of Wire With The Same Input. When I Turn It Back On The Screen... View more questions Search
Add your answer here.
|