 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Electrical questions
Installed a solar panel last january
3 units in basement that convert the dc current to ac Ever since i have been experiencing power surges Some appliances have burned out Tv's will come on in the middle of the night Baltimore put a monitor in for a week and found no problems The solar company that did the solar system put a monitor in for a week to monitor the output of theit divertors and found no problems Is there that the divertors could create a power surge Any suggestions would be greatly appreciated |
||||
Check out some similar questions!
I have installed 6 insulated can ceiling lights. They are on one circuit controlled by a Levaton paddle switch with a slide dimmer rated at 600w.The bulbs are phillips 60 watt halogen spots for a total wattage of 360w. They have worked fine for about a year usually run at about halfway on the...
I was called upon to try and fix a GFCI in a bathroom that occasionally trips. There is a 12/2 20 amp feeder coming into a three gang plastic box. In the box are the GFCI, a single pole switch to a fan, and a dimmer switch to a lighted medicine cabinet. Occasionally, the GFCI trips after you turn...
I'd like to put my panel in a specific location, but its about 15ft. Away from where the meter can be. Do I have to pipe between the meter and 200A panel? It seems it would be hard to pipe something that big inside of a wall to a recessed panel, but on the other hand I doubt they make a cable...
GFCI circuitry. Technical purpose and function. Can someone please explain? Also, what is the proper way for an inspector to test a GFCI receptacle?
What are some of the costs related to the installation of three phase into an existing building not previously wired? This particular install would be for both 240 and 480v. Thank you
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
