CT3200 Magic Stat

rimrocker2238 Posts: 1, Reputation: 1

New Member

Oct 28, 2010, 04:45 PM

CT3200 Magic Stat

CT3200 magic stat has a blank screen after replacing batteries, and won't turn back on. What do I do?

Joshdta Posts: 2,549, Reputation: 45

Ultra Member

Oct 28, 2010, 05:18 PM

Throw it away and get a new one.

Add your answer here.

Check out some similar questions!

I have a CT3200 Honeywell Prog Stat. It only has screws for WYG wires, I have WGRB? [ 2 Answers ]

I have a year old... working when taken down... CT3200 Honeywell Thermostat. It has connections for white, yellow and green wires. I have white green red and blue coming out of my wall. Is there a way to connect this thermostat? Thank you in advance for your assistance. Honeywell wanted...

Lennox 51M33 stat to Hunter 44860 stat [ 4 Answers ]

Lennox Heat Pump with Electric heat backup Lennox 51M33 wiring O - orange R - red G - green Y1 - yellow W1 / E jumper - white L - light red (pink) C - black T (Outdoor temp sensor) - blue

Magic Stat CT3200 programmable thermostat read out [ 1 Answers ]

On Magic Stat CT3200 programmable thermostat what does this read out mean: baE lo

Magic stat [ 2 Answers ]

I have a magic stat thrmostat and am trying to find a link to the owners manual, can anyone help?

Just 3 wire T-Stat connection, new stat, diff letters [ 6 Answers ]

Hi all, I've done tons of reading and can't find my specific wiring, tstat combo to figure it out... hopefully someone can shed some light on it for me. Natural gas forced air furnace, no air conditioning. Had a honeywell for the last 9 years, easy install, labelled easy. (but its dead) Wire...