 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore dishwasher won't pump out (665)
RE: 665.15829
Washer won't pump but the motor is running.. the drain hose has been removed and is clear... with the dishwasher off... water trickles out of pump discharge under the washer.. I've opened the top of the washer and have the impeller out. And related housings... all these parts are clear and clean... I can't blow air back from the hose into the cabinet... its like there is a restriction in the discharge or there is a solenoid that isn't open... When I removed the housing from the inside of the cabinet I've gotten 2 check balls out of the system which I thought were the outlet discharge check valves... My question is... does this model made by Whirlpool use a discharge solenoid or does it reverse the pump to discharge the water... and if it reverses the pump is there a flapper type discharge check deeper in the unit... |
||||
Check out some similar questions!
Our dishwasher is only 3 years old. It had been working OK for over 2 years and then it became noisier and noisier. It got to the point where it would fill with water but then the water was not sprayed around inside. We would end up pressing Cancel. We've had 2 different and very experienced...
We have a Kenmore Model 665/15767000 dishwasher with the wash light flashing continuously. Unfortunately, we have misplaced the owner's manual and have no clue what to do. Can anyone enlighten us? Thanks!
I just purchase a home and the dishwasher is a Kenmore 665. The dishwasher was running and someone turned off the circuit breaker (the dishwasher stopped). When the circuit breaker was put back on the dishwasher will not start. I don't have the manual and can't figure out how to get the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
