Ask Experts Questions for FREE Help !
Ask
    Robert_M's Avatar
    Robert_M Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 19, 2010, 02:38 PM
    Intertherm E1EB-015HA problems
    Hi, I have an intertherm E1EB-015HA. When I turn the T-stat in the house to either hot or cold the inside blower comes on normal and air comes through the vents, but the air blowing into the house is outside temp. the fan does not come on the outside unit, it only hums and does nothing else. I've flipped the breakers and looked for obviouse broken or corroded wires but come up empty. Any help would be much appreciated.
    Thanks
    Robert M.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Oct 19, 2010, 11:45 PM

    Sounds like a problem with the outside unit. If you know about electric you can open the unit and test the circuits. BTW also check for loose or damaged wires especially where they connect to the compressor.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm furnace problems [ 0 Answers ]

My intertherm furnace id tripping the breaker, any sugguestions?

Intertherm furnace pressure switch open problems [ 1 Answers ]

We have an intertherm furnace. The led light is blinking twice meaning that the pressure switch is open. We have replaced the pressure switch and are able to blow air through the attached tubes. They seem clear. The light continues to keep blinking.

What's wrong with my Nordyne, E1EB-020HA blower? [ 2 Answers ]

I have a Model# E1EB-020HA Nordyne central heat & air unit. The blower stopped working. There are two breakers on the base of the unit itself. I flipped them off, waited, and flipped them back on and the blower kicked in. I moved my thermostat from fan to auto and it went back off. I tried the...

Intertherm m3rl 90+ eff. 80,000 BTU Downflow problems [ 1 Answers ]

Hi, I just installed an intertherm m3rl 90+ downflow furnace today and what happens is the inducer fan runs and is venting proplerly, but when the flame lights and blower fan is signaled, the blower is blowing out the flame. How can this be possible unless there is some sort of leak in heat...

Nordyne. E1EB-015HA [ 1 Answers ]

Nordyne model E1EB-015HA How do I check the sequencer's and limit switches what are the omh's values or what should be open or closed on the bench, I have the furance and coils on the bench for testing. Unit blows transformer in service. Was great before I cleaned the cooling coils above the...


View more questions Search