 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Oneida royal oil/wood furnace thermostat on wall the lights won't turn on
I went to turn on the furnace for the first time this year and it won't work. I opened the cellar door turned on the switch then turned on the thermostat in the kitchen no lights. What could be wrong? There should be a green and red light. They don't come on. I'm cold and the kids are cold. I can't afford to have a repair man fix it. I would like to fix it myself. Anyone have an idea of what could be wrong?
|
||||
Check out some similar questions!
I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...
Dishwasher is a kenmore ultra wash, won't turn on, stopped before cycle was finished, water in bottom, can't get it to turn on to drain, no lights no nothing, have tried other plugs,nothing
I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...
I noticed that my thermostat works fine and opens the zone valve for the basement. The problem is that it won't send a signal to the furnace to turn on and heat the water. I have no problem with the upstairs zone valve. It opens and turns on the furnace. Is this a wiring issue? Thanks...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
