 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Disassemble HB ceiling fan?
Trying to remove a HB fan from the ceiling. Have it partly disassembled, but can't get the center pipe to come out any further. It's loosened but won't rotate more than about 90 degrees before becoming tight again. I can't see into the ceiling area to see what might be keeping the pipe from coming out any further. Any ideas?
|
||||
Check out some similar questions!
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
I have two on and off swtich one use to control the ceiling fan and another one use to control ceiling fan light. Handy man changes the ceilng fan light. I wasn't home and wifey paid him without checking what going on Now both the switch either turn off the entire thing or turn on the entire...
I have someone who installed a ceiling fan with light and I told them how to hook it up but they want to work the light from the switch and have the ceiling fan going when the switch is off. I told them they would need 2 switches instead of one which powers the fan and light and can only be...
Okay well I thought my fan broke because I went to home depot and they guy told me its not the remote since the tiny blinking light still worked on the remote. It was the box thing on the inside of the fan.. now I'm trying to change the box and I took off the light part and I'm on the part...
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
