Ask Experts Questions for FREE Help !
Ask
    luvit's Avatar
    luvit Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 26, 2007, 08:18 AM
    Hampton bay ceiling fan
    I have a hampton bay ceiling fan and the light has blown out. I don't know how to remove the light fixture to replace the old bulb. There is no seen screws to remove the glass fixture.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    May 26, 2007, 09:07 AM
    No 3 small screws on side? Have seen models with spring wire to hold. May need to pull down with slight pressure, or a side to side. If you have model #, Ceilingfanrepair will tell you exactly. I would provide Model# before he gets here, for faster answer. Good Luck
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    May 26, 2007, 11:30 AM
    Actually, I don't know anything about model numbers, model NAMES are helpful to me.

    But, in most cases, if there are no visible screws, you apply pressure to the glass, and rotate it until it drops out.
    sheshe2001's Avatar
    sheshe2001 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Oct 28, 2007, 10:32 AM
    Comment on ceilingfanrepair's post
    Thanks, I had no idea on how to get to the bulb. It was pretty easy once I knew how to do it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

View more questions Search