I have a hampton bay ceiling fan and the light has blown out. I don't know how to remove the light fixture to replace the old bulb. There is no seen screws to remove the glass fixture.

No 3 small screws on side? Have seen models with spring wire to hold. May need to pull down with slight pressure, or a side to side. If you have model #, Ceilingfanrepair will tell you exactly. I would provide Model# before he gets here, for faster answer. Good Luck

Actually, I don't know anything about model numbers, model NAMES are helpful to me.

But, in most cases, if there are no visible screws, you apply pressure to the glass, and rotate it until it drops out.

Thanks, I had no idea on how to get to the bulb. It was pretty easy once I knew how to do it.