 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I bought 4'' oil filled submersible motor1.5 kw , 2 hp 230 voltage . Take high amphs
Hi friends,
I bought 4'' oil filled submersible motor1.5 kw , 2 hp 230 voltage . After installation I checked no load test like with out pump at the time this motor take high amphs like 5 amphs why what problem pl help me Thank you |
||||
Check out some similar questions!
I was wondering why my temperature gauge was going up so high, although the engine didn't actually get too hot. I couldn't understand why the coolant wouldn't remain in the radiator and I filled it up several times. I Checked the oil a couple days ago and the dipstick was covered about 7 or 8...
Hunter Ceiling Fan: variable power switch on wall on High, pull chain on High but the fan barely turns. Oil OK. Have to give blades a push to get them to turn but once turning, they move at the slowest speed possible. Any ideas for what to do?
What size generator would be needed to run a 1 hp submersible well pump ?
I have an MTD lawnmower with a 5 hp B&S engine with primer. The oil was over-filled. I drained the oil/refilled and changed the spark plug. Now, I have to put starter fluid in the carb to get it to crank. However, it will crank but quickly die. It will not crank without the starter fluid. What...
I just had my 89 accord dx (carb) auto trans 132k miles tuned up. It cost me 300.00 for a full tune up and oil change. They told me my distributor needs to be replaced because it was leaking past the “O” ring and had filled the distributor with oil. I asked about replacing the “O” ring and they...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
