Ask Experts Questions for FREE Help !
Ask
    bduke1946's Avatar
    bduke1946 Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2010, 06:21 AM
    Timing hole location kohler k321s engine?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Oct 6, 2010, 07:34 AM

    Its on the carb side,
    Its in the blower housing
    Line up the S on the flywheel with hole
    The hole is about the size of a token.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

LT 160 Kohler engine When I move the throttle the engine stays at maximum speed [ 2 Answers ]

The throttle cable is like new and works smoothly. It looks like the mechanical link age is working. The engine appears to stay at max speed. I do not hear the engine speed up when I engage the mower. I used to always hear the govenor increase when the mower was engaged

I have a K321S engine on a power king tractor. The PO butchered the wiring and I [ 1 Answers ]

I have a K321S engine on a power king tractor. The PO butchered the wiring and I'm trying to put it back to the original setup. I bought the power king ignition switch and tried hooking it up by the wiring diagram in the manual but there isn't a complete diagram on the ignition wiring, i.e. where...

Kohler engine [ 1 Answers ]

Its not getting fuel to fuel filter

View more questions Search