 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a K321S engine on a power king tractor. The PO butchered the wiring and I
I have a K321S engine on a power king tractor. The PO butchered the wiring and I'm trying to put it back to the original setup. I bought the power king ignition switch and tried hooking it up by the wiring diagram in the manual but there isn't a complete diagram on the ignition wiring, i.e. where does the single wire from under the front cover go. There are 2 wires in a cover that goes to the rectifier and a third wire that I have no idea where it goes.
|
||||
|
||||
|
Hi, My guess is that it goes to the condenser. Just a guess; try picking up an engine service manual here: K&T Parts House Lawn Mower Parts and Chain Saw & Trimmer Parts Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My Yard King 52" riding mower, model 52161x89B caught fire yesterday after mowing where there was a lot of straw. I had just turned it off and the engine was smoking. Before I could blow the straw off the engine/muffler it erupted in flames. It burned for about 3 minutes (seemed must longer) before...
I just bought a Murray yard King lawn tractor model 46370X5A date code 0753 and having trouble finding a parts diagram to locate parts. Is there even one out there ? Also is the 46370X5A, 46370X5B, 46370X5C models pretty much the same as far as parts go? Cause I did find parts diagram for the X5C...
I have a Craftsman tractor 42in deck hydrostatic, while cutting the lawn the other day I was going up a slight incline(that I always mow) and the tractor lost its power to go forward essentially. It rolled down hill and actually tipped over. Now when I start the tractor the engine is fine but it...
I have cleaned it, changed oil, oil filter, air and gas filter, cleaned the carburator with carb. Choke and still have no luck it will only run and cut with choke pulled out. What should I do?:(
View more questions Search
|
