Ask Experts Questions for FREE Help !
Ask
    kddrnhall's Avatar
    kddrnhall Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 5, 2010, 04:08 PM
    How do I get the washer off the pipe so I can replace it with a new washer and nut
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Oct 6, 2010, 05:02 AM

    Hi Kddrnhall...

    I'm afraid we will need more in formation on this, OK?

    What pipe? What valve/faucet? Hot or cold water... or both leaking? Is this a shutoff?

    Let us know...

    Mark
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Oct 6, 2010, 05:55 AM
    Quote Originally Posted by ;
    how do i get the washer off the pipe so i can replace it with a new washer and nut
    Not having any information about what type of valve we're talking about we need to know the type of faucet, its brand name, its age and any other details that you have. Back to you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does it hurt to raise drian pipe up on washer to level of stand pipe [ 2 Answers ]

In order to camouflage hoses and drain pipe running from washer, I want to run all 3 through a pvc pipe and worried raising the level of drain pipe up on the washer might cause a problem

Star lock washer bolt and nut scenario [ 3 Answers ]

On the lock washer, does the protruding part go facing The nut, so it does not spin off. Or does it go facing the bolt

Compression nut and washer not holding onto tail pipe. [ 3 Answers ]

After reading the previous posts, I at least, have some terminology, and a little more information, however.. . My daughter's boyfriend recently installed a new sink faucet for me, and now the drain tail pipe (PVC) that slides into the compression nut above the s-trap has been separated, several...

Need washer drain pipe installed, now washer stand pipe is backing up. [ 3 Answers ]

I've had to route my washer drain out of my septic system (drain fields are bad). In the house crawl space the washer pipe 2" pvc came through the floor one bend (elbow) and 3' of travel to the septic cast iron pipe down to the septic tank. I cut into the pvc just past the elbow (maybe 2' past)...

Drain pipe for washer backing up once washer starts to empty what could be causing [ 4 Answers ]

What couild be causing the drain pipe fro washer to back up and spill all over floor behind washer

View more questions Search