Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My fan did work hardwired, now when I've added a switch it won't work
[ 20 Answers ]
I have a fan that I installed that was hard wired. Then I tried to make it function off an existing light switch, that controlled nothing. The switch had the standard three wires (black, white, bare) that ended on the switch. Black and white connected to the switch and the bare sitting in the...
Window switch don't work
[ 1 Answers ]
I own a 2003 Ford Explorer and my right front window stop working, only go down, no up I found out about no ground in the switch, I put the one from the rear door and still don't Work, Thanks, Miguel
Coachlights
[ 2 Answers ]
I have 2 outdoor coachlights that are sensored to go on at night that have suddenly stopped working. We've changed the bulbs and made sure they are securely screwed on but that doesn't seem to be the problem. Can it be that the sensors have stopped working and if so, how can they be fixed? Or...
Some fixtures on a switch work some don't
[ 1 Answers ]
I have a switch that doesn't want to shut off, and now that it does, only some of the lights are coming back on. The recessed cans on the switch work but another ceiling fixture doesn't. I took the cover off the switch and noticed the ground wire wasn't connected to the switch and the red wire...
Replacing garage coachlights
[ 1 Answers ]
Hi! I want to replace my garage coachlights. I assume it's off with the old and on with the new but would appreciate any 'gotchas' that I should be prepared for. The wiring diagram that came with the lights I bought are very vague so if you know of a website with pictures that'd be a help.... View more questions Search
|