Ask Experts Questions for FREE Help !
Ask
    magicrandi's Avatar
    magicrandi Posts: 3, Reputation: 1
    New Member
     
    #1

    Oct 1, 2010, 06:05 AM
    Is a universal cartridge OK and can we use tub?
    Hello. I pulled out cartridge in the tub yesterday and was happy to see water will come out. I'm waiting on moen to send knob and I'm going to home depot to buy new cartridge. They said only get theirs and not a universal one. First, is that really necessary? ( it's a 2255- or something like that) Also, while waiting on knob... will we be able to use shower and bath with just cartridge in?
    Thanks!
    ~Randi
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Oct 1, 2010, 06:40 AM

    . I'm waiting on moen to send knob and I'm going to home depot to buy new cartridge.
    Moen guarantees their parts for the life of the faucet. Call and request one.
    They said only get theirs and not a universal one. First, is that really necessary
    Wow! A cartridge that fits Moen, Delta, Kohlor Ect. . I didn't know that they made a " fits all cartridge" Could you furnish more information on this such as a brand name?
    Also, while waiting on knob... will we be able to use shower and bath with just cartridge in?
    Yes! Simply use an pair of pliers to pull out and turn the stem.
    Good luck, Tom
    magicrandi's Avatar
    magicrandi Posts: 3, Reputation: 1
    New Member
     
    #3

    Oct 1, 2010, 08:00 AM
    Thanks, Tom!! Also, I looked for a universal cartridge and didn't see the right model. Morn said don't get a universal model of the 1225 because even though home depot will say it fits, it won't. Anyway, I didn't see one anyway so bought the morn one for 20 bucks. Also, I told them I bought my home with the fixture in already so they said no warranty. He was nice though and is still sending knob free: 0) Thanks again for your reply!! ~Randi

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

A non-universal tub spout installation [ 8 Answers ]

I am replacing a shower spout in a shower ~30years old. The copper pipe protruding through the wall has a brass fitting which appears to be permanently attached to the copper pipe. I do not see any solder or thread between the two pieces. The brass piece has a few threads near the wall and the...

Remove old tub cartridge [ 0 Answers ]

I have a moen tub faucet and it's likely 30 years old. I can't get it out. I have a cartridge puller but on my model there is a stainless front piece with 2 protrusions that the handle fit over to control temperature range(?). So the cartridge puller does not work. This is a singel handle system...

Universal Fit Tub Diverter Spout Replacement [ 2 Answers ]

I recently purchase a PLUMB WORKS-Universal Fit Tub Diverter Spout, replacement. I was able to take to old one off-(Moen), The instructions are totally confusing and of course no 1-800 for assistance, The instructions states make the pipe copper protudes no more than

Moen cartridge for tub and shower repair [ 2 Answers ]

Can a moen cartridge for controlling water flow to bath and shower be repaired?

Universal tub spout [ 3 Answers ]

I am trying to replace my tub spout with a universal tub spout and I cannot get the old one loose, any idea's?


View more questions Search