Ask Experts Questions for FREE Help !
Ask
    glafonta's Avatar
    glafonta Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 27, 2010, 08:33 PM
    Kenmore elite dryer digital control panel
    My Kenmore Elite Dryer says F2 when I try to start it. Sometimes the panel is dead also. What do you think I should do?

Check out some similar questions!

Kenmorte elite dryer control panel won't work [ 0 Answers ]

Inside dryer light turns on, but buttons on the control panel won't light up. Reset circuit breakers, still no action. Is there a reset on the dryer somewhere or do I need to replace the control panel-circuit board?

How do you remove the front toe panel on a Kenmore Elite Dryer? Is is only a panel. [ 1 Answers ]

I need to get under the dryer to replace a heating coil I guess. Dryer Not Drying but I cannot get the toe panel off.

My kenmore elite he4 electric dryer control panel will not light up, any ideas? [ 0 Answers ]

I have a kenmore elite he4 electric dryer, the interior lights come on when you open the doors, although none of the red lights on the control panel will light up. I checked the breaker by turning it on and off a couple of times. No change. I was going to check the Thermal fuse. Not quite sure...

Kenmore Elite Dryer Toe panel - how to get panel OFF! [ 3 Answers ]

I have a Kenmore Elite Model # 110.600094990 27 inch Electric Dryer - NOW How the heck does one take the Toe Panel Off / or Open this lower section of the dryer? There are two lower edge clips and two upper edge retainers. I CAN NOT get the panel to budge! This is a 7 yr old unit. Thx DAS

Removing Kenmore Elite Control Panel [ 0 Answers ]

For the life of me, I cannot determine how to remove the top Control Panel of a Kenmore Elite 110.24952300 Washing Machine. I want to hinge it back so I can remove the cabinet and access the pump. Am I missing the obvious?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.