 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmorte elite dryer control panel won't work
Inside dryer light turns on, but buttons on the control panel won't light up. Reset circuit breakers, still no action. Is there a reset on the dryer somewhere or do I need to replace the control panel-circuit board?
|
||||
Check out some similar questions!
I need to get under the dryer to replace a heating coil I guess. Dryer Not Drying but I cannot get the toe panel off.
I have a kenmore elite he4 electric dryer, the interior lights come on when you open the doors, although none of the red lights on the control panel will light up. I checked the breaker by turning it on and off a couple of times. No change. I was going to check the Thermal fuse. Not quite sure...
I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons...
I have a Kenmore Elite Model # 110.600094990 27 inch Electric Dryer - NOW How the heck does one take the Toe Panel Off / or Open this lower section of the dryer? There are two lower edge clips and two upper edge retainers. I CAN NOT get the panel to budge! This is a 7 yr old unit. Thx DAS
For the life of me, I cannot determine how to remove the top Control Panel of a Kenmore Elite 110.24952300 Washing Machine. I want to hinge it back so I can remove the cabinet and access the pump. Am I missing the obvious?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
