Ask Experts Questions for FREE Help !
Ask
    grain71's Avatar
    grain71 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 27, 2010, 04:15 AM
    2003 f250 oil leak
    My 2003 F250, 7.3lt TD leaks a huge amount of oil, its coming out of between the back of the oil sump and the front of the transmition?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Sep 27, 2010, 07:26 AM

    Sounds like the rear main seal... try degreasing the engine then when its clean and dry look to see where the fresh oil is coming from as soon as its started. Wind can blow it around and make it appear to be coming from someplace else.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2003 f250 diesel,won't start [ 0 Answers ]

2003 f250 diesel,won't start ,but will try to turn over but only runs battery down,heard there's a relay fuse or in line body fuse.

Ford F250 Injectors for 2003 6.0 engine [ 1 Answers ]

Fuel problems, replace fuel filters (both) and oil filter, cranked and run for about one mile, stopped truck would go dead when put in gear, afterseveral attemps, truck would not crank, peroid.

Ford 2003 f250 [ 0 Answers ]

My 2003 f250 will not start when the overdrive "off" light is on. When I turn the key on and off many times it will go off and the engine will start and run fine. Why is this and what can I do about it? Thanks for any help

Oil cooler leak Ford f250 [ 2 Answers ]

I have a 97 ford F250 this is the third time I have trouble with oil cooler. But I cannot tell if unit is bad or just rings or seals. How can I check for place of oil leaK ?

Oil leak, glow plugs, starter for f250 [ 1 Answers ]

I have a 2002 f250 7.3 turbo diesel and am having some issues 1. it won't start... I know that I fried the starter and replacing that, but what makes it not start with the slightest cool down in temp. It will eventually but slow and messed the starter up in the process. I have changed relays to...

View more questions Search