Ask Experts Questions for FREE Help !
Ask
    hhenderson's Avatar
    hhenderson Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2010, 12:20 PM
    After changing the battery in my remote, my fan will only do high speed
    When I changed the battery in my remote, I could not get the fan to do the three speeds. It will only do high speed
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Sep 25, 2010, 01:56 PM

    Try changing the batteries if the remote worked before you changed batteries there is nothing wrong with the remote - just the batteries. Sometimes batteries can do weird things to remotes if they are the least bit drained - even out of the package.
    hhenderson's Avatar
    hhenderson Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 27, 2010, 01:34 PM
    I tried that and now the remote doesn't work at all. I'm getting not read outs for temp etc.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is there a 9V battery in a remote controlled ceiling fan body? [ 3 Answers ]

I purchased a Home Trends low mount ceiling fan from WalMart about 5 years ago. My father and I installed it. It is a model that has a remote control which turns on the light, dims the lights, and has 3 speeds for the fan. It worked great until last fall. At that time, I noticed that it was more...

Emerson remote control may not be totally working- can't get to HIGH speed [ 0 Answers ]

Emerson fan with remote control. Remote turns on fan and lights. Motor speed can be slow or medium, but I can't differentiate between medium and high (it's definitely not high). So I took it down and rigged it up on my work bench to see if I can figure something out. I ended up bypassing the...

Can you hook up the high speed wire to the medium speed wire on blower fan [ 20 Answers ]

My blower fan has 4 wires but unit has 3 the high speed wire from blower has nowhere to go what do I do because we have very low air flow

Changing the speed of ceiling fan w/o a remote [ 3 Answers ]

I hard wired my ceiling fan into the electrical outlet in the ceiling. I can not change the speed. It runs on high. Is there any way to make it run on low without taking it down and rewiring the remote back into it? The remote was not working is why I took it out and hard wired it to the outlet.

Remote Control Fan goes at 1/2 speed [ 2 Answers ]

I have a Hampton Bay remote control fan, it goes at 1/2 speed in full and medium and does not go at all in slow. The forward/reverse arrow on the remote LCD indicates the opposite direction the fan is moving.

View more questions Search