 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My furnace won't complete the ignition cycle. York Furnace Model: P3UCD12N07601A Updraft Here are the steps when the furnace attempts to ignite: 1. Exhaust fan and igniter turn on. 2. A little while later the gas comes on and ignites. 3. After about 2 seconds, the igniter goes off...
I have a GE washer, (about 5 years old). The washer goes through the wash and rinse cycles fine. When it gets to the spin cycle, it stops. I can override and manually place the machine on spin. How can I fix this problem so the cycle runs through completely. Thank You
I bought my washer used. It works fine, until it gets to the spin cycle. It starts to drain, and after a few minutes it will begin to spin and stops. However, if it has no clothes in the tub, it will complete the spin cycle. Once in a while, it will complete the cycle with clothes in it, but it is...
My washer stops after the agitation cycle is complete. I find my clothes standing in water. If I open the lid and close it, it will start to drain and the cycle will compete as if it had never stopped at all. It seems to me that the lid switch is the problem. Sometimes when the cycle has stopped, I...
View more questions Search
|
