 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
In April 2010 I have installed a Noma non programmable thermostat in the bathroom wit
In April 2010 I have installed a Noma non programmable thermostat in the bathroom with a heater/fan and when I put it on it works for about 2-3 minutes the numbers on the display disappears,shut the heathher,comes back by itself cause cannot stop it by pushing the buttons comes back and the heater start again.Do I need to replace the thermostat or is it simply not weel installed?if so can I get reimburse as I don`t have the cover box to return it to Canadian Tire.Any answer will be
|
||||
Check out some similar questions!
In April 2010 I have installed a Noma non programmable thermostat in the bathroom with a heater/fan and when I put it on it works for about 2-3 minutes the numbers on the display disappears,shut the heathher,comes back by itself cause cannot stop it by pushing the buttons comes back and the heater...
I have just purchased a Noma 5 + 2 Programmable Thermostat model 52-2557-0 from Candian Tire. There are 4 terminals on the back G R Y W I have an old Mercury Lever Thermostat with only 2 wires; one white and one labelled "C". In the manual it states not to use the wire labelled "C". That...
Need to relocate a Noma programmable thermostat, it has 2 parts, the thermostat & base, how do you separate the 2?
I have an old carrier thermostat model q674j119 or t874g1790 for my oil furnace and heat pump. I tried to change this with Noma programmable thermostat model 52-2558-8 but everythings not working. This was the wiring for the original thermostat: O -> Orange R -> Red W2 -> White G -> Green C...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
