Ask Experts Questions for FREE Help !
Ask
    David60's Avatar
    David60 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 18, 2010, 11:09 PM
    I put in a new toilet downstairs, everything works fine, except after flushing the wa
    I put a new toilet downstairs, everything works fine axcept the water level in the bowl drops to very after flushing.
    David60's Avatar
    David60 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Sep 18, 2010, 11:16 PM
    I put in a new toilet downstairs, everything works fine, except after flushing the wa
    I put in a newtoilet downstairs, everything works fine except when I flush the water level in bowl drops to very little
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Sep 19, 2010, 11:38 AM
    Are you sure you have the small plastic tube from the fill valve in the overflow tube, that's where the fill water for the bowl comes from? The bowl should drain down during a full flush.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dryer Help: Dryer works fine and turns on fine but will stop heating after 1-2 minute [ 2 Answers ]

Hello. I have a Frigidaire Electric Dryer Model GLEQ215ESO. My dryer had a bad bearing and heating coil so I replace it about 6 months ago. It was working perfect up until a week ago when my cloth wasn't drying. I took a look at it and it seems to work fine for the first 2 minutes of use and then...

Downstairs toilet bubbles and water levels goes down after flushing [ 4 Answers ]

Yesterday when running my washing machine my downstairs toilet started to gurgle and lose water in the bowl. Now today just flushing it makes the gurgling and water level go down. The toilet flushes fine and the water leavel is normal for a couple of minutes but then you hear the gurgles and can...

Furnace heats fine,circulates fine, but when put on a/c blower motor goes on and off [ 0 Answers ]

The furnace works fine all winter, no issues only when it is switched aver to a/c does it do this.

My thermostat works fine in a/c but for the heater I have to put the fan on manual [ 2 Answers ]

I have a hunter thermostat model 44860, and a central air heating a/c unit. The air conditioning system works fine. The heating side however does not kick on the fan in auto, I have to switch it to manual on then of course it doesn't shut off if I don't turn it off because it in on mode not auto?...

The air conditioner works fine. When put in to the heat mode the out door unit trips [ 2 Answers ]

The air conditioner works fine. When put in to the heat mode the out door unit trips outs on high head pressure but the indoor fan still blows. Why?

View more questions Search