 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
White-rodgers 1F80-0261
I'm trying to install this new thermostat. The wires from my old one are green (which wasn't connected to anything), red and white. They don't have labels. The connections choices are R, o/b, C, W, Y, G. What goes where? I don't understand the wiring diagrams that are in the manual.
|
||||
Check out some similar questions!
White-Rodgers 1F80-51 wiring
[ 3 Answers ]
I have a Rheem heat pump unit. A White-Rodgers 1F80-51 thermostat was connected up with the A/C cooling cycle working, but for heat, only the strip elements in the air handler come on. The thermostat is wired; white to W, red to RH w/jumper to RC, blue to B, nothing to O, yellow to Y, green to...
Hook Up of White Rodgers 1F80-261 Thermostat
[ 3 Answers ]
I have a gas furnace with only 2 wires running to a mechanical thermostat. When heat is off, Voltage is about 25 volts AC mesured at thermostat. When heat is on, voltage measured at thermostat is 0 volts AC. Need to know if I can replace old mechanical thermostat with White Rodgers 1F80-261...
White-Rodgers 1F80-54 manual
[ 2 Answers ]
How do I get a manual for the White-Rodgers 1F80-54 manual?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
