Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replaced shower faucet stem
[ 1 Answers ]
Replaced a american standard 11K-3H/C faucet stem and barrel. It is leaking. The valve opens (twist the handle to the left) but when twisting the handle to close and turn off water the handle will continually turn left does not stop.. any ideas?
Replaced Faucet valve stems and shower stem devirter
[ 1 Answers ]
I have recently replaced my faucet valve stems and the shower devirter stem in the bath tub, and now the only thing that water is flowing through is the shower head and not the spot going in the tub. Also the shower devirter only makes a 1/4 turn.
Shower Valve Stem Replaced, Still leaking!
[ 5 Answers ]
I replaced my Price Pfister shower valves, including diverter, and I cannot stop the slow drip from the spout into the tub. I am a novice DIY'er with an older 1930's triplex. There was no leak before with the previous valves but they were very old, tough to turn on/off, and had water temperature...
Replaced hot water stem in shower and now no water.
[ 3 Answers ]
I am trying to replace the hot water stem in my bathtub and I got it changed out and when I turned the water on nothing. Took it off and turned the water on and water sprayed out and again I put it on and nothing. I am a complete novice with this, there is another piece that came with the stem...
No water after shower stem repair
[ 2 Answers ]
My shower faucet and handles had some minor dripping problems, so I decided to repair the hot and cold stems (2 handle shower stall). I got a repair kit and replaced the washers and changed the seats, but when I put the stems back and turned the water back on, there is no flow to the shower head!... View more questions Search
|