 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replaced shower faucet stem
Replaced a american standard 11K-3H/C faucet stem and barrel.
It is leaking. The valve opens (twist the handle to the left) but when twisting the handle to close and turn off water the handle will continually turn left does not stop.. any ideas? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What words are more discriptive than, "What is the life of a shower faucet stem?"? A qualified service person replaced the hot water shower valve stem in May of this year. This a.m. I was unable to turn the water off. When I used a towel for a better grip, I was finally successful. Now, I am...
I have recently replaced my faucet valve stems and the shower devirter stem in the bath tub, and now the only thing that water is flowing through is the shower head and not the spot going in the tub. Also the shower devirter only makes a 1/4 turn.
I replaced my Price Pfister shower valves, including diverter, and I cannot stop the slow drip from the spout into the tub. I am a novice DIY'er with an older 1930's triplex. There was no leak before with the previous valves but they were very old, tough to turn on/off, and had water temperature...
The house is well over 25 years of age and I have replaced both hot and cold water valves and tub faucet without removal of bath and shower stall tiles - still look good. Purchased a diverter stem (Galtmaster tub and shower models - 1963 to 65). With the old diverter I would turn clockwise to have...
I am trying to replace the hot water stem in my bathtub and I got it changed out and when I turned the water on nothing. Took it off and turned the water on and water sprayed out and again I put it on and nothing. I am a complete novice with this, there is another piece that came with the stem...
View more questions Search
|
