Ask Experts Questions for FREE Help !
Ask
    wemr13's Avatar
    wemr13 Posts: 3, Reputation: 1
    New Member
     
    #1

    Sep 16, 2010, 12:31 PM
    Heil circuit wire prints
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Sep 16, 2010, 06:57 PM

    HEIL made 1,327 different units and my crystal ball is broken so you are going to have to help out with a model number. Be accurate also
    wemr13's Avatar
    wemr13 Posts: 3, Reputation: 1
    New Member
     
    #3

    Sep 17, 2010, 05:41 AM
    I am sorry , it is NDLK075DF03 ( MFR #) AND L884233240 (SERIAL #)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Black wire red wire and white wire spliced to 10/3 on a 220 circuit [ 25 Answers ]

I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...

How can I use an older 3 wire 220 circuit for a 4 wire hot tub [ 6 Answers ]

Can I somehow use an existing 3 wire 220 volt circuit to power a 4 wire hot tub? Running a new 4 wire circuit back to the main panel will be long and difficult. I have nearby access to an old 3 wire sub panel once used for an air conditioner. This original circuit is missng the ground wire.

Wire size wire & circuit breaker do I need for a 15.8 range [ 2 Answers ]

What size circuit breaker & wire size do I need rfor a 15.8 raqnge ?

Convert one three wire circuit to two circuits [ 1 Answers ]

At present, two fixtures on one switch are in parallel; so a three wire cable connects the two fixtures. How to convert existing three wire cable to support two switches, one for each fixture? Reason is that the three wire cable is buried in finished ceiling, and running another cable to one of...

How to wire 2 wire fan remote to 3 wire circuit? [ 10 Answers ]

I have a room that has 2 light switchs to the same light, so it is a 3 wire circuit. I bought a fan with a remote and the wall mounted remote has only 2 wires, how can I connect it? Thanks, Pete


View more questions Search