Ask Experts Questions for FREE Help !
Ask
    scotty_dog's Avatar
    scotty_dog Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 12, 2010, 01:42 PM
    Rhine uc7067rev switch
    I need wire color code for rhine uc7067rev switch & color code for the 3 fan speed wires for a hunter model # 23654
    I have 18ft ceilings & 2 hunter fans. Hunter don't have reverse on their remote. My receiver finely died. I installed tommy bahama wall switch's & receiver w/rev on both, they both work fine, except I need to splice in the rev. wires but the wires are different colors
    Thank You, scott
    z32turbo's Avatar
    z32turbo Posts: 1, Reputation: 1
    New Member
     
    #2

    Sep 25, 2010, 08:40 AM
    If you are referring to the Rhine UC7067REV Switch - where did you pruchase it from?
    bsevans's Avatar
    bsevans Posts: 1, Reputation: 1
    New Member
     
    #3

    Jan 19, 2011, 07:49 AM
    You can buy the UC7067REV at http://eceilingfans.com/ceiling_fan_remote_controls.html. Scroll to the bottom of the page and you will see it marked REV. It comes with a 4.5uF capacitor. You need to confirm that your connector does not use two of the connector ports diagonally across from each other and that there is an additional white and blue wire that are connected to the fan motor via a crimp. If you need a different speed controlling capacitor then go to their capacitor page and find the one you need. The reversing module with capacitor was under $50.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rhine light bulbs [ 3 Answers ]

Need a Rhine bulb, P/N FHD40EL, 40W. Do you have?

I have a new Rhine reverse part for my Hampton Bay ceiling fan, do I re-wire. [ 2 Answers ]

I have a new Rhine reverse part for my Hampton Bay ceiling fan, do I re-wire.

Separate Fan light switch, fan switch and switch for can lights to one location [ 2 Answers ]

I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.


View more questions Search