Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need to replace 'O' rings and Gaskets in Delta Faucet
[ 1 Answers ]
My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you
Delta bathtub spout removal
[ 5 Answers ]
I am trying to removce a Delta bathtub spoutl There is a small indentation on the bottom of the spout, against the wall, with a plastic tab in it, no allen wrench holes, just the plastic tab. I am guessing it is a slip on connection and have tried pushing that tab left, right, up and forward ...
Delta shower cartridge removal
[ 1 Answers ]
What is the secret to removing the entire cartridge? I have the replacement # RP32104. It may be just scale and mineral build up. Approx 5 yrs old
Delta bath cartridge removal
[ 3 Answers ]
I have a single handle Delta bath faucet valve whose cartridge needs to be replaced because it is dripping. It is about 4 years old or so. I can find no part number anywhere on it. I got all the parts removed, down to removing the brass collar that holds the cartridge in place. NO GO! I put a...
Delta valve removal/replacement
[ 4 Answers ]
:( Hi, I am taking off an old single valve delta shower.( For bath and shower.) I have the handle off and the plastic nut but can't turn off the cap without fear of breaking the assembly. I see no set screw holding the cover or cap on. Ideas? Mikey 91 View more questions Search
|