Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan blades catch on casing for light below. Can I adjust blades to raise them
[ 1 Answers ]
Hi. I installed my Kendal ceiling fan and light but the blades won't turn on their own. The motor hums and if I turn the blades to get it going they turn, but there is a hideous grinding noise as the blades rub against the light casing below. Is there any way to adjust the blades so it will turn...
More air from H/B ceiling fan-tropical blades
[ 1 Answers ]
Is there a way to get more air from a fan with the big tropical blades? The Harbor breeze is running on high and puts out very little air. Thank you Doug4gov
Ceiling Fan Doesn't Run with Blades on
[ 13 Answers ]
The blades on my ceiling fan were loose. When I tightened them, the fan would not turn. I tried loosening them again to their previous position, but no luck. When I remove the blades, the assemble runs at full speed. When the blades are reattached, it does not run or runs very slowly. I have...
Hampton Bay Ceilng Fan Replacement Blades
[ 2 Answers ]
I know Home Depot sells Hampton Bay products, but they do not seem to have the replacement blades that fit Hampton Bay Models. Where can I find replacement blades?
Can I put shorter blades on my ceiling fan?
[ 1 Answers ]
I have an odd shaped nook in my kitchen that needs a ceiling fan. I currently have a light fixture there, so I'll need a fan with at least 3 lights. It's a smaller area, so I can't have a fan more than 36" wide. Unfortunately that doesn't leave me with many options out there. Fans that small... View more questions Search
|